|
Yaniv Farkash, MSc 2023
|
Omaier Naser Eldeen, MSc 2023
|
Noam Shmilovich, MSc |
Gennady Kozyukin, MSc |
2020 “Multilevel structured electrospun nanofibers for energy applications”
|
2020 “Development of high performance nano/microfiber based anodes for hydrogen production by electrochemical-thermally activated chemical water splitting” |
Manar Halabi, MSc 2020 “Electrospinning of ionomer/metal/oxides nanofibers with electrical and ionic conductivity” |
2020 “Combustion Mechanism and Optimization of Aqueous Urea – Ammonium Nitrate Fuel” |
2020 Co advisor: Prof. Avner Rothschild “Water electrolysis with separated oxygen evolution and hydrogen evolution cells” |
2019 “Electrospun Mesoporous ceramic nanofibers for catalytic applications” |
Idan Calo, MSc 2019 “Catalytic abatement of emissions from Nitrogen-Based Alternative Fuel Combustion” |
2019 “Flat indium doped ZnO coatings” |
Michael Epstein, MSc 2017 “Development of an ignition device for continuous combustion of Nitrogen Based Fuel (NBF)” |
2017 Co advisor: Prof. Y. Levi “Properties of H2O-N2-CO2 at High Pressures and Temperatures for a Nitrogen-Based Alternative Fuel Power Cycle” |
2016 “Catalysis of a Nitrogen-Based Alternative Fuel (NBAF)” |
Ofer Rozent, MSc 2016 “Continuous Electrospinning of PZT Nanofibers for Energy Applications” |
2015 “Efficient combustion of nitrogen based fuels” |
|
|
|
Dr. Deepa Ayillath Kitteri, PDF
|
2015 “Catalytic activity of electrospun silver fibers in selective oxidation of organic molecules” |
2014 “Electrospinning of PZT fibers” |
Ahuva Finkelzon Buk, MSc 2014 “Fire Resistant Glass (FRG) based on a Foaming Interlayer” |
2013 “Synthesis of nitrogen hydrogen based Fuels” |
Asahel Cohen, MSc 2011 “Tape casting of electrolytes for thermal batteries” |
2011 “Corrosion during Combustion of nitrogen Hydrogen based Fuels” |
2010 “Transparent conductive oxide (TCO) coatings via the Sol-Gel method” |
David Fuchs, MSc 2009 “Drying of suspension stabilized foams” |
Yair Binyamin, MSc 2008 “Organically doped Metals: effect of synthesis route on catalytic activity” |
Dennis Esterlis, MSc 2008 “Alumina Sol-Gel optical protective coatings on multispectral ZnS windows” |
Itzik Shturman, MSc 2008 “Conductive LaNiO3 Sol-Gel Coatings” |
Aleksy Etin, PhD 2007 “PZT films by Sol-Gel Methods” |
2006 “Sol-Gel seed layer for oriented PZT films” |
2004 “Ceramic foams based on Alumina/Titania” |
Alon Dolev, PhD 2002 “Synthesis Characterization and Catalytic Activity of Pt Supported on Non-Hydrolytic Amorphous Alumina” |
Yonatan Lipp, MSc 2002 “Heterogeneous Catalysis on Ceramic Foams” |
2001 “Effect of the melt-texturing process on the properties of NdBaCuO based superconductors” |
2001 “Catalytic properties of alumina synthesized by the nonhydrolytic sol-gel process”
|
Simon Melamed, MSc 1999 Co advisor: Prof. Apeloig “Organo-silicon compounds as Precursors to Ceramic Materials” |
1998 “Synthesis and Characterization of Alumina-Based Gels” |
1997 Co advisor: Dr. Yachin Cohen “The Synthesis and Properties of Alumina-Based Aerogels” |
Pinhas Yosefov, MSc 1997 “Synthesis of Nd-Ba-Cu-O superconductors” |
Michal Shach Kaplan, MSc 1997 Co advisor: Prof. Efraim Kehat “Environmentally Friendly Disposal of PVC” |
Hagit Shufman, MSc 1995 “Effect of BaCuO2/CuO Eutectic Composition additions on the Properties of YBCO” |
1994 “Synthesis, Characterization and Modeling of Ceramic Powders Prepared by Spray Pyrolysis” |
1992 “Processing of Ultrafine Ceramic Powders by In-situ Polymerization and tape casting” |
Laura Kadoch, MSc 1992 “Extrusion of fine ceramic Powders and Gels” |
|
1992 “Production and Characterization of Ultrafine Superconducting by Powder Oxalate Co-precipitation” |
